Skip to the page

Other ways and bridges

Fund through βš™ Other ways, the mixer guide, manual relay steps and the relay process, and move money between chains with πŸŒ‰ Bridge.

On this page

The rows on πŸ’° Funding cover most launches. βš™ Other ways keeps the bundle's own screens one tap further down: every way to pay from SOL, and paying the bundle from ETH. Separately, πŸŒ‰ Bridge on the panel moves money from one chain to another, to the deployer or straight to the bundle wallets.

βš™ Other ways

On πŸ’° Funding, tap βš™ Other ways.

KosherbotSample
βš™ Other ways to fund πŸ’Έ Fund from SOL β€” the bundle's own screen: Husher holds it, or ⏳ one at a time from the runner on the PC. β–Ά Bundle from ETH funders β€” ETH on Ethereum or Robinhood, paid in batches by funder wallets. πŸ§ͺ Mixer guide Β· βš™ Manual steps β€” the step-by-step guides.
14:02
πŸ’Έ Fund from SOL β€” every way
β–Ά Bundle from ETH funders
πŸ§ͺ Mixer guideβš™ Manual steps
β€Ή Funding
ButtonWhat it opens
πŸ’Έ Fund from SOL β€” every wayThe bundle's own screen for paying from the SOL funder
β–Ά Bundle from ETH fundersPaying the bundle from ETH on Ethereum or Robinhood Chain, in runs, through funder wallets
πŸ§ͺ Mixer guideA step-by-step guide to an outside mixing service for the launch's chain
βš™ Manual stepsRelay wallets, hop wallets and the transfers that move their money on to the bundle, one step at a time

On a Robinhood launch there is one button instead, β–Ά Bundle funding β€” timing, payer, source; see Robinhood funding.

Husher is an external service that pays your wallets from exchanges, with delays between payouts; it costs about 1.45% and takes longer. Both ways below pay through it.

πŸ’Έ Fund from SOL β€” every way

KosherbotSample
πŸ’Έ Fund the wallets from SOL From SOL in the group's funder wallet, through Husher: each wallet paid by an exchange, 35–45 min apart. Two ways 🏦 Husher holds it β€” one deposit, one order; Husher pays each wallet itself, over days. Nothing of ours has to keep running. ⏳ One at a time β€” an order per wallet, paid by the runner on the PC once the last one's SOL has arrived. The money stays in the funder until each payout. Going now 🏦 β‰ˆ 4.31 SOL deposit ⏳ β‰ˆ 4.36 SOL in all
14:02

Both ways pay from the SOL in the group's funder, each wallet paid by an exchange:

WayHow it paysWhat runs
🏦 Husher holds itOne deposit, one order. Husher pays each wallet itself, over days.Nothing of Kosher's has to keep running.
⏳ One at a timeAn order per wallet, each made once the last wallet's SOL has arrived. The money stays in the funder until each payout.The runner on the computer that runs Kosher

Under Going now, the screen compares what each would take today. In the example, 🏦 needs a deposit of about 4.31 SOL, and ⏳ about 4.36 SOL in all. When an order is under way, this part shows where it stands instead, for example how many wallets are paid. The order check, progress and rules are the same as on Fund the bundle.

β–Ά Bundle from ETH funders

This road pays a Solana bundle from ETH. Your ETH on Ethereum goes through Husher to SOL, paid to each wallet from its own exchange at its own moment. The deployer sends nothing.

KosherbotSample
πŸ’Έ Fund the bundle β€” Solana Β· self-paid 0/12 funded Β· 20% of supply β‰ˆ 3.6000 SOL to buy Β· the deployer sends nothing πŸ’Ά ETH β†’ πŸŒ€ Husher β†’ β—Ž SOL β†’ πŸ‘› 12 wallets β†’ πŸš€ launch
πŸ“‹ How it works Your funders' ETH on Ethereum goes through Husher to SOL, paid straight to each wallet from its own exchange, at its own moment. The deployer sends nothing. Each wallet keeps 0.0050 SOL back for its accounts, fees and the sale later.
πŸ’° Source & funders β€” Ethereum
Pays fromEthereum
Funders⬜ not made yet
Sourceβšͺ off β€” fund each run yourself, or tap πŸ’§
πŸ”‘ Make funders
πŸ’§ Fund funders from source
⇄ Pay from Robinhood Chain instead
⏱ Payouts β€” 125–155 min apart Payouts: one after another, 125–155 min apart β€” a run of 10 takes 18h 45m–23h 15m, and the next run carries on 125–155 min after its last. βœ… Clean on Atlas + Bubblemaps.
πŸ•’ Payouts: 125–155 min apart
πŸ’± Quote β€” none yet No quote yet β€” tap to price it.
πŸ’± Quote
Progress: 0/12 funded
14:02

The screen shows how many wallets are funded (0/12), what the bundle buys (20% of supply, about 3.6000 SOL) and the path: ETH β†’ Husher β†’ SOL β†’ 12 wallets β†’ launch. Each wallet keeps 0.0050 SOL back for its accounts, fees and the sale later.

  1. Set up the funders

    Open πŸ’° Source & funders. Tap πŸ”‘ Make funders to make the funder wallets that pay the runs. Fund them yourself before each run, or tap πŸ’§ Fund funders from source to fill them from a source wallet. ⇄ Pay from Robinhood Chain instead pays from ETH on Robinhood Chain.

  2. Pick the timing

    πŸ•’ Payouts in the ⏱ Payouts fold sets when Husher pays each wallet of a run. The default is one after another, 125–155 min apart; at that spacing a run of 10 takes 18h 45m–23h 15m. See Fund the bundle for every choice.

  3. Get a quote

    Tap πŸ’± Quote to price the whole plan before anything is sent. πŸ“¦ Next run: 10 wallets sets how many wallets the next run pays.

  4. Run each run

    Each run has its own confirmation, with what it pays, who pays it and how many wallets are left for later runs. Tap Run live to send it.

Once the ETH funders start paying a bundle, the other roads wait: Kosher refuses a second order until they finish. After they have funded the bundle, adding wallets would start them over, so make a new set instead.

πŸ§ͺ Mixer guide

Tap πŸ§ͺ Mixer guide:

KosherbotSample
Mixer guide (manual) These break obvious deposit→buyer links when used before relays or layer. The bot does not send mixer txs. ‒ Mixoor — Solana privacy pool — manual deposit/withdraw before relay or bundle funding.
14:02
Mixoor
β€Ή Panel

It lists the outside mixing service Kosher has a guide for on the launch's chain: Mixoor on Solana, RobinHide on Robinhood Chain. Tap the service for its numbered steps and its link. Kosher sends no mixer transactions: you deposit and withdraw on the service's own site, from a wallet that is not your deployer or bundle set, and send the result on to your relay wallets.

When you are done, tap I used the mixer. Kosher notes the step on the launch plan, and the button on βš™ Other ways reads πŸ§ͺ Mixer βœ“. The service sets its own fees; Kosher shows none.

βš™ Manual steps

Tap βš™ Manual steps:

KosherbotSample
Manual funding steps Use πŸ’° Funding on the panel for the full flow. This screen is for step-by-step fixes. One hop: relay β†’ bundle Two hops: relay β†’ hop β†’ bundle 1. Make relays (+ optional hops) 2. Fund relays (split bridge) 3. Run layer / multi-hop About 144s total (12 transfers, 12s apart).
14:02
πŸ”€ Make relaysπŸ”— Make hops
πŸŒ‰ Fund relaysπŸŒ‰ Bridge β†’ bundle
β–Ά One-hop layerβ–Ά Multi-hop
β–Ά Fund bundle (auto)
πŸ§ͺ Mixer guide
β€Ή Panel

This screen is for doing the relay road by hand, or fixing one step of it. The money goes through relay wallets on its way to the bundle:

  • One hop: relay β†’ bundle.
  • Two hops: relay β†’ hop β†’ bundle.
  1. Make the wallets

    πŸ”€ Make relays makes one relay wallet for each bundle wallet. πŸ”— Make hops makes the same number of hop wallets, for two hops. Back up their keys as you would the bundle's.

  2. Fund the relays

    πŸŒ‰ Fund relays pays the relay wallets through a bridge, one order per relay. πŸŒ‰ Bridge β†’ bundle pays the bundle wallets directly instead.

  3. Move the money on

    β–Ά One-hop layer has each relay send its balance, less gas, to its matching bundle wallet. β–Ά Multi-hop sends relay β†’ hop, then hop β†’ bundle. Each asks to confirm first (Run layer or Run multi-hop). The relay, hop and bundle sets must have the same number of wallets.

The transfers go 12 s apart: for 12 bundle wallets, one hop is 12 transfers, about 144 s; two hops are 24 transfers, about 288 s. Each transfer pays its gas. On an EVM chain, moving a relay's money on also leaves a small reserve behind: about 0.00009 ETH per wallet never reaches the bundle, and the funding plan counts it. Once the layer has run, the button on βš™ Other ways reads βš™ Manual βœ“.

The relay funding process

The relay funding process pays an EVM bundle in batches: several funder wallets pay the bridges, the bridges pay the relay wallets, and the relays move the money on to the bundle. On Robinhood Chain a new launch is paid by one Husher order instead (see Robinhood funding); the relay process stays on screen for a launch whose relay funding has already started, and from πŸ”€ Layer setup and the batch buttons.

KosherbotSample
Fund bundle (automated) One flow: multi-payer β†’ relays β†’ bridge β†’ peel β†’ bundle (batched). Bridge: AnySwap + Houdini β€” alternate wallets (e.g. 5+5 per batch of 10) so both providers run every batch. πŸ’° Quote total cost β†’ πŸ”’ Lock plan β†’ fund funders from separate sources β†’ run batches. Use Run ALL batches (auto) for the full run (10h spacing by default). Wallets: 20 Β· Batches: 2 (10/batch, ~10h apart in auto mode) Source: Mixed (AnySwap + Houdini) Tap πŸ’° Quote total cost first (send budget + bridge fees) before locking the plan. Lock plan only after you accept the quoted total.
14:02
AnySwapHoudiniFixedFloat
Husher● MixedAuto (all)
πŸ’° Quote total cost
πŸ“‹ Show batch planπŸ”’ Lock plan (quote first)
βœ“ Check Houdini API
πŸ”€ Make relays
πŸ”‘ Make funder wallets
πŸ’§ Fund funders from source
πŸ“– Multi-payer guide
πŸ”€ Layer setup
β€Ή Panel

Pick the bridge on the first two rows:

BridgeHow it pays
AnySwapOne order per wallet
HoudiniOne order per wallet, each routed through an exchange
FixedFloatFixedFloat to a hop wallet, then Relay on to the relay wallet. Needs hop wallets.
HusherOne deposit per batch pays every wallet in it, from several exchanges, with the payout timing you pick
Mixed (the default)AnySwap and Houdini in turn, for example 5 + 5 in a batch of 10
Auto (all)Wallets spread across every bridge that is available

Batch size

10 by default, in wallets per batch.

Batch spacing

10 h by default, in hours between batches in auto mode.

  1. Quote and lock

    Tap πŸ’° Quote total cost. It prices the whole plan: the bundle's target, the total to arrange with the bridges' fees, and the gas. Then tap πŸ”’ Lock plan. Each wallet gets its own uneven amount, and πŸ“‹ Show batch plan lists them:

    KosherbotSample
    Fund bundle (automated) One flow: multi-payer β†’ relays β†’ bridge β†’ peel β†’ bundle (batched). Bridge: Husher β€” one deposit per batch pays every wallet in it, from several exchanges. πŸ’° Quote total cost β†’ πŸ”’ Lock plan β†’ fund funders from separate sources β†’ run batches. Use Run ALL batches (auto) for the full run (10h spacing by default). Wallets: 20 Β· Batches: 2 (10/batch, ~10h apart in auto mode) Source: Husher (one order per batch) Β· Plan locked Payouts: one after another, 125–155 min apart β€” a run of 10 takes 18h 45m–23h 15m, and the next run carries on 125–155 min after its last. βœ… Clean on Atlas + Bubblemaps. πŸ“¦ Bundle target: ~0.8035 ETH πŸ’° Total to arrange (plan): 0.815600 ETH (+ ~0.0004 gas) πŸ“¬ Quoted on relays: ~0.8035 ETH Quote matches locked plan β€” refresh if you change bundleEth or provider. Next batch: 1 (index 0) Plan (10/batch, 10h spacing suggested) Total send budget: 0.803544 ETH (uneven across 20) Batches: 2 1. wallets 1–10 (10) Β· 0.0406, 0.0220, 0.0673, 0.0379, 0.0491, 0.0227, 0.0207, 0.0305, 0.0266, 0.0434… ETH 2. wallets 11–20 (10) Β· 0.0534, 0.0550, 0.0448, 0.0716, 0.0261, 0.0548, 0.0623, 0.0166, 0.0472, 0.0101… ETH
    14:02
    AnySwapHoudiniFixedFloat
    ● HusherMixedAuto (all)
    πŸ•’ Payouts: 125–155 min apart
    πŸ’° Quote total cost
    πŸ“‹ Show batch planπŸ”’ Plan locked
    βœ“ Check Houdini API
    πŸ’§ Fund funders from source
    🏦 Houdini deposits: you pay
    πŸ” Audit next batch funders
    β–Ά Run ALL batches (auto)
    β–Ά Run batch 1 only
    β–Ά Peel batch 1 only
    πŸ”€ Layer setup
    β€Ή Panel

    If you change the bundle's ETH or the bridge after locking, the lock button reads πŸ”’ Re-lock plan (quote changed): quote and lock again before running.

  2. Make the wallets and funders

    πŸ”€ Make relays, πŸ”‘ Make funder wallets and, for FixedFloat, πŸͺœ Make hop wallets. Fund the funders from separate sources, or tap πŸ’§ Fund funders from source. Read πŸ“– Multi-payer guide and confirm with βœ“ Separate sources OK: the batches stay locked until you do. πŸ” Audit next batch funders checks the next batch's funders.

  3. Run the batches

    β–Ά Run ALL batches (auto) runs every batch on its schedule: bridge, wait, move the money on, then the next batch. β–Ά Run batch 1 only runs one. β–Ά Peel batch 1 only moves a batch's relay money on to the bundle when it arrived but was not moved yet; on empty relays it moves nothing.

While it runs, the screen says so and counts the batches done:

KosherbotSample
Fund bundle (automated) One flow: multi-payer β†’ relays β†’ bridge β†’ peel β†’ bundle (batched). Bridge: Husher β€” one deposit per batch pays every wallet in it, from several exchanges. πŸ’° Quote total cost β†’ πŸ”’ Lock plan β†’ fund funders from separate sources β†’ run batches. Automation is running β€” bridge, wait, peel, then the next batch on schedule. Wallets: 20 Β· Batches: 2 (10/batch, ~10h apart in auto mode) Source: Husher (one order per batch) Β· Plan locked Payouts: one after another, 125–155 min apart β€” a run of 10 takes 18h 45m–23h 15m, and the next run carries on 125–155 min after its last. βœ… Clean on Atlas + Bubblemaps. πŸ“¦ Bundle target: ~0.8035 ETH πŸ’° Total to arrange (plan): 0.815600 ETH (+ ~0.0004 gas) πŸ“¬ Quoted on relays: ~0.8035 ETH Quote matches locked plan β€” refresh if you change bundleEth or provider. Completed batches: 1/2 Next batch: 2 (index 1)
14:02
AnySwapHoudiniFixedFloat
● HusherMixedAuto (all)
πŸ’° Quote total cost
πŸ“‹ Show batch planπŸ”’ Plan locked
βœ“ Check Houdini API
πŸ’§ Fund funders from source
🏦 Houdini deposits: you pay
πŸ” Audit next batch funders
⏹ Stop automation
πŸ”€ Layer setup
β€Ή Panel

⏹ Stop automation stops the automated run.

What it costs. The bridges' own fees (the quote shows them; Husher about 1.45%), the funders' gas, and per bundle wallet the gas it needs to buy plus about 0.00009 ETH left behind when the relay's money moves on. The quote and the lock include all of it.

πŸŒ‰ Bridge

πŸŒ‰ Bridge sits on the panel's second page, beside πŸ’° Buy, and works before anything has launched. It moves value between chains through AnySwap, an outside swap service. Only the bot's owner or a group admin can use it. You always see the quote before an order is made.

  1. Pick where the money leaves from

    KosherbotSample
    πŸŒ‰ Bridge Which chain does the money leave from? Swapped through AnySwap. You always see the quote before anything is created.
    14:02
    RobinhoodEthereumSolana
    BaseArbitrumBNB Chain
    CardanoAptosCosmos
    AvalancheAVAXCBitcoin Cash
    1/3More β€Ί
    Cancel

    The chains Kosher launches on or funds from come first: Robinhood, Ethereum, Solana, Base, Arbitrum and BNB Chain. More β€Ί pages through the rest, 12 at a time.

  2. Pick where it arrives

    KosherbotSample
    πŸŒ‰ Bridge β€” sending ETH from Ethereum. Which chain should it arrive on?
    14:02
    RobinhoodSolanaBase
    ArbitrumBNB ChainCardano
    AptosCosmosAvalanche
    AVAXCBitcoin CashBEP20
    1/3More β€Ί
    Cancel
  3. Send the amount

    Type a number, like 0.5.

    KosherbotSample
    πŸŒ‰ Ethereum β†’ Robinhood Chain How much ETH should go? Send a number, like 0.5. The service takes about 0.45%, and has a minimum of roughly $9. If you send this to the bundle wallets, it is the amount each wallet gets.
    14:02
    Cancel

    The service takes about 0.45%, with a minimum of roughly $9. If you send to the bundle wallets, the amount is what each wallet gets.

  4. Give the address

    Paste the receiving address as a message, or tap a button.

    KosherbotSample
    Sending 0.05 ETH to Robinhood Chain. Which address receives it? Paste it as a message. It must be a Robinhood Chain address. Anything else and the funds do not come back.
    14:02
    The 20 bundle wallets (1.0 ETH total)
    Use this group's deployer (0xaf2e…6129)
    Cancel

    The 20 bundle wallets (1.0 ETH total) pays every bundle wallet the amount you typed, here 0.05 ETH Γ— 20, one order each. Use this group's deployer fills in the deployer's address; it only appears when the deployer's address works on the receiving chain. Kosher checks any address you paste against the receiving chain.

  5. Confirm

    KosherbotSample
    πŸŒ‰ Ethereum β†’ Robinhood Chain Send: 0.5 ETH Receive: about 0.49759362 ETH To: 0xaf2e3f2fe6e972ae1716c5318b2cde9140266129 Minimum: 0.004 ETH Service fee: 0.00225 ETH Network fee: 0.00015 ETH Takes: about 4 minutes βœ… The deposit is sent from here automatically once you confirm. πŸ“‰ The rate floats: the final amount is whatever the service gives when it settles
    14:02
    Bridge it
    Cancel

    Tap Bridge it.

Example. Bridging 0.5 ETH from Ethereum to Robinhood Chain: the service fee is 0.00225 ETH (0.45%) and the network fee 0.00015 ETH, so about 0.49759362 ETH arrives, in about 4 minutes. The order's minimum is 0.004 ETH. The rate floats, so the final amount is whatever the service gives when it settles.

Kosher sends the deposit itself on EVM chains and Solana, for that chain's own coin, as here: "βœ… The deposit is sent from here automatically". For anything else, you send the deposit by hand, and the confirm screen says so before the order exists.

Next steps