Holders and spread
Make or import holder wallets, then move the bundle's coin into them through the market with the spread.
On this page
Holder wallets are a second set of wallets, apart from the bundle wallets that buy at launch. The spread moves coin from the bundle wallets to the holder wallets through the market: a bundle wallet sells a slice and a holder wallet buys it, paced over a window you set. It runs on pump.fun, StonkFun and Meteora, and on pons with its own version.
This page is Solana's, down to the last two sections. Launching on Robinhood Chain? Read On Robinhood Chain (pons), which has its own screens and its own wash.
On the panel
Once the token is launched, the panel's π Spread to holders section has three buttons: π₯ Holders, π° Funding and π Spread. The π button shows the spread's state: βΈ not started, β³ and a UTC time when a start is due, βΆοΈ with washes done of all while it runs, βΉ when stopped, β when done.
Holder wallets
Tap π₯ Holders:
| π₯ Holder wallets Β· $OTTR |
| Holders | Funding | Each gets |
| 8 planned | π¦ Husher | β2.50% |
π₯ The wallets
π¦ How they are born
π₯ How many
Each holder wallet gets one slice of the bundle's coin. More holders means smaller slices and more washes, and each wash pays the two trades' fees.
- π Make makes that many wallets at once, with no SOL in them. The number on the button is the plan; once a set exists, π Make makes no more.
- π₯ Import takes a set of your own instead.
- The keys screen lists every holder wallet with its key. Back them up as you would the bundle's.
How they are born
The funding toggle names the mode that is on, with a tick, and what a tap switches to: Funding: π Empty β (tap: Husher) or Funding: π¦ Husher β (tap: Empty).
- π Empty: the holders start with nothing. In π Wash mode the spread hands each one its gas out of the sale it buys from, so an empty holder works.
- π¦ Husher: each holder is paid from an exchange before the spread. Husher is an external service that pays your wallets from exchanges, with delays between payouts; it costs about 1.45% and takes longer. Pay for it with πΈ Fund them via Husher, or from π° Funding.
β³ Paid over
π¦ Gap per exchange
π² Each
With a range, each holder is paid its own amount between the two. If the gap per exchange needs more time than β³ Paid over allows, the payouts take longer; the screen shows when they should all be paid.
Example. 8 holders through Husher at 0.12 SOL each: 0.96 SOL in payouts plus about 0.01 SOL for Husher's 1.45%, paid over 4 hours, about one payout every 34 minutes.
The spread screen
Tap π Spread:
| π Spread to holders Β· $OTTR |
| Holders | Funding | Mode | Starts |
| 8 planned | π¦ Husher | π Wash | on a tap |
π Start
π₯ Holders Β· 8
| Holders | Paid over | Exchange gap | Paid |
| 8 | 4 h | 21 min | 0 / 8 |
π° Money
| Who | For | SOL |
| π₯ Holders | 8 Γ 0.120 payouts | 0.96 |
| π¦ Husher | cut (1.45%) | 0.01 |
| π Bundle | washes' fees and accounts | 0.02 |
- β Already counted in π° Funding's total
π¦ What moves
| Supply moved | Holders get | Fees | Each |
| 20.0% | β19.3% | β3.4% | β2.500% |
How it works
Costs, in detail
- Costs: 0.97 SOL to fund 8 holders through Husher
- payouts: 8 Γ 0.120 SOL = 0.96 SOL Β· an exchange pays a wallet at least 0.120 SOL
- Husher's cut: β 0.01 SOL (1.45%)
- Spread needs: β 0.018 SOL from the bundle wallets, for the washes' fees and the holders' accounts β keep it in them beyond the buying
The screen opens with π Start, then the holders, the money and what moves. Without holder wallets it says to make or import them first.
Wash or market buy
On pump.fun and StonkFun, one button switches how each slice reaches its holder. The button names the mode that is on: π Wash β (tap: π Market buy) or π Market buy β (tap: π Wash).
| π Wash (the default) | π Market buy | |
|---|---|---|
| The trades | One transaction that both wallets sign: the bundle wallet sells the slice and the holder buys it straight back | Two transactions in one bundle: the bundle wallet sells, and the holder buys about as much right behind it |
| Who pays the buy | The sale. The holder keeps π§ Gas each out of it | The holder, with its own money |
| Empty holders | Work: each gets its gas from its sale | Refused: fund them first (π¦ Husher), or use π Wash |
| Fees | Taken out of the coin moved, so the holders get a little less than leaves the bundle | Paid by the holder in money: it buys its coins whole |
| Bundle wallets pay | The washes' fees and the holders' accounts (below) | 0.0002 SOL a pair: their sale's fee and priority |
In a wash on pump.fun, the curve or the pool pays the sale to the holder, and the bundle wallet opens the holder's accounts. On StonkFun the sale's proceeds reach the holder by a transfer inside the same transaction. In a market buy, each holder needs what its slice sells for, plus fees, a small tip and its accounts. The check names any holder that is short, and the start is refused while one is.
Meteora always uses π Wash, and pons always works like a market buy (see On Robinhood Chain).
Settings
β± Window
Two washes are never less than 5 s apart, so with many holders the window stretches: the screen then says "at least" and the real length. Each wash also waits for a quiet moment on the market, when nothing has traded for 4 s.
π§ Gas each
π Start
Set a number and the spread starts by itself that many minutes after the launch. On a tap, the screen advises starting 30 minutes or more after the launch.
π Max share (StonkFun)
pump.fun has no max share.
What it costs
The π° Money and π¦ What moves folds work it out from your settings. In the screen above, on pump.fun's curve, 20.0% of the supply leaves the bundle and the holders get about 19.3%.
What a wash takes out of the coin moved, by venue:
| Venue | Taken out of the coin moved |
|---|---|
| pump.fun, on the curve | about 3.4%: 2.45% to the two trades' fees, and 0.93% left in each holder as SOL (or the pair) rather than bought |
| pump.fun, a sold-out bundle in the pool | 2.4% on a SOL pair, 0.6% on a token pair |
| StonkFun | 1% a side, plus the holder tax both ways on a reward-mode coin: 8% at a 3% tax, 2% in standard mode |
| Meteora | 2%, two trades at the curve's end fee |
A market buy on pump.fun's curve costs the holder 2.5% (1.25% a side) in money, and nothing is left unbought.
What a wash costs the bundle wallet per holder, beyond its buys:
| Venue and pair | SOL per holder |
|---|---|
| pump.fun curve, SOL pair | 0.0022 |
| pump.fun, sold-out bundle | 0.0058 |
| pump.fun, token pair | 0.0053, plus π§ Gas each (at least 0.0041) |
| StonkFun, SOL pair | 0.0004 |
| StonkFun, token pair | 0.0035, plus π§ Gas each |
So 8 holders on pump.fun's curve take about 0.02 SOL from the bundle wallets: keep that in them beyond their buys. Holders paid through Husher bring their own SOL, so on a token pair no gas is handed to them. Each holder also keeps π§ Gas each (0.01 SOL by default) out of its sale in a wash.
After the spread, π« Pour can keep moving coin from the holders into brand-new wallets.
Check and start
Tap π Check & start
Kosher sizes every wash at today's price and sends nothing. The check shows the share of the supply that leaves the bundle wallets, in how many washes, what the holders get back, the gas and fees, and the pace. It warns about any bundle wallet that holds too little SOL for its washes.
Tap βΆοΈ Start the spread
It starts what the check showed, within ten minutes of the check. After that, check again. Every wash is written down before it is sent, so no slice is ever washed twice.
The spread will not start while the unload, a sale or another job is moving the same wallets.
Stop, status and the live card
While it runs, a card in the chat follows it, edited after each wash:
KosherbotSample- βΉ Stop the spread stops it after the wash in hand.
- π« Cancel the start cancels a start that is due by itself. π Check & start then runs it on a tap.
- π Status shows where it stands: planned, running, stopped or done, with washes landed.
- π Check & carry on picks up where a stopped spread left off.
When it is done, the unload, β’οΈ and π€ sell from the holder wallets, as long as π Sells from is on π Auto. Choose π¦ Bundle in βοΈ Unload settings to keep selling from the bundle wallets. Washes that did not land leave their coin in the bundle wallets.
On Robinhood Chain (pons)
On pons, tap π Holders & spread on the panel:
| π Spread $OTTR to holders β pons |
| π₯ Holders | |
|---|---|
| β β β π₯ Wallets | 12 made |
| β β β π How | the bundle wallet sells and its sale pays the holder, which buys back with that: two transactions, nothing between them |
| π§ Their money | |
| β β β πΈ Who pays | the sale Β· the holders need no money of their own |
| β β β π¦ Births | on β π¦ Births, before the launch or after: βΆοΈ waits for them |
| β β β π¦ Order | β π¦ Births pays each holder its first money: a day before the launch is best |
| β β β π Payouts | 35β45 min apart |
| π The spread | |
| β β β π Now | not started |
| β β β π Start | on a tap: π Check, then βΆοΈ |
| β β β β± Window | 61 min (set: 30) Β· each holder 5.5 min after the last, at a quiet moment |
| β β β π§© Pattern | holders born within a day of each other are washed 5.5 min apart: none buy within Bubblemaps' 5 min |
| β β β πΈ Cost | the fee and the creator tax come out of the slice: the holders keep β 94% on a 1% + 2% coin (the 2% each side is ours on our own coin) |
βΉοΈ How it works
- Robinhood takes one signer a transaction, so a wash is two: the bundle wallet sells its slice to the coin's curve, then the holder buys back, when nothing has traded for 4 s.
- π§© Bubblemaps' pattern search joins holders born within a day of each other whose first buys come within 5 min: a Husher order's holders are, so each is washed 5.5 min after the last (20 holders β 1.8 h).
- Nothing passes between the two wallets and nothing but the coin's public curve touches both β on Bubblemaps the holder's money and coin both come from the curve (checked on BOUNTY's and MEOWLY's maps).
- πΈ The sale pays the holder: it names the holder as its recipient, and the holder buys back with that, keeping a sliver for gas β no money of its own, the slice less the levies, as a Solana wash. π¦ Births (on by default) give each a small first amount beforehand, spaced the clean way, so Atlas never sees its wash as its first money: βΆοΈ waits for them.
- π A graduated coin washes the same way in its Uniswap pool, through Uniswap's own Universal Router β the public one hundreds of wallets trade pons pools through, never our own swap executor (one contract only we use: a link). A holder inside the launch window waits out its snipe tax.
- Stopped or failed, π Check & βΆοΈ carries on: a sale that landed is bought back, never sold twice.
A wash on pons is two transactions: the bundle wallet sells its slice to the coin's curve, then the holder buys it back, when nothing has traded for 4 s. A graduated coin washes the same way in its Uniswap pool. The curve fee and the creator tax come out of the slice on both trades: on a 1% + 2% coin, the holders keep about 94%.
- πΈ The sale pays β (tap: π° up front): the sale pays the holder, which buys back with it and keeps a little for gas. The holders need no money of their own. This is the default.
- π° up front: each holder is paid what its buys cost first, by one Husher order, and the bundle wallets keep their sales' ETH.
- π¦ Births: on β (tap: off): when the sale pays, each holder first gets a small payment through Husher, 35β45 minutes apart. βΆοΈ waits until every holder has had it. Order the births a day before the launch so they are done by then.
Holders paid by one Husher order are washed about 5.5 minutes apart, so the window stretches: 20 holders take about 1.8 hours.
The pons check
Tap π Check:
KosherbotSampleIt prices the spread and sends nothing. Anything marked β blocks the start: fix it, then π Check again. When the check is clean, tap βΆοΈ. A stopped or failed spread carries on from π Check and βΆοΈ: a sale that landed is bought back, never sold twice.